DESIGN LED 108IP™
cable that converts from standard Edison 3-prong to the IP rated twist lock connector.
When jumping from fixture to fixture be sure to only use Elation IP rated power
connectors to maintain the IP rating.
11. DMX In Lead – This lead is the main DMX input lead. When the unit is the first in a
chain or the only fixture to be used with a DMX controller, be sure to use the DMX
starter cable that converts from a standard 3-pin XLR DMX connector to the IP rated
twist lock connector. When jumping from fixture to fixture be sure to only use Elation
IP rated DMX cables to maintain the IP rating.
©Elation Professional, Los Angeles Ca.
11
www.ElationLighting.com