If You Forget The Password; Entering The Password Recall Procedure - BenQ MX852UST+ User Manual

correct password to change projector settings via the Projector
Network Display System
The digits being input will display as asterisks on-screen. Write your selected
password down here in this manual in advance or right after the password is
entered so that it is available to you should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
7. To leave the OSD menu, press MENU/EXIT.

If you forget the password

If the password function is activated, you will be
asked to enter the five-digit password every
time you turn on the projector. If you enter the
wrong password, the password error message
as pictured to the right displays lasting for three
seconds, and the message 'INPUT
PASSWORD' follows. You can retry by entering another five-digit
password, or if you did not record the password in this manual, and you
absolutely do not remember it, you can use the password recall procedure.
See "Entering the password recall procedure" on page 33
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down in a short time.

Entering the password recall procedure

1. Press and hold AUTO on the
projector or remote control for 3
seconds. The projector will display a
coded number on the screen.
2. Write down the number and turn off
your projector.
3. Seek help from the local BenQ
service center to decode the
number. You may be required to
provide proof of purchase documentation to verify that you are an
authorized user of the projector.
Operation
Password Error
Please Try again.
for details.
RECALL PASSWORD
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
12345678
MENU Back
33