Basic Operation And Features; Master Reset - Mercury SC1000 User Manual

BASIC OPERATION AND FEATURES

Basic Operation and Features
3
4
2
RPM x 1000
1
0
SMART TOW
RESET
SELECT
Smart Tow
Tachometer
Power up: Each gauge will power up when the ignition is turned
on. The gauges will stay on as long as the ignition is on.
Lights: Adjusts the brightness and contrast of the gauge.
Buttons: The "MODE/SELECT" button is used for selecting
information screens. The "+" and "-" buttons are used for setting
engine speed during troll, cruise control, and setting gauge
calibrations.
Troll Control: Sets and controls the idle speed of the engine for
trolling without using the throttle. (System Tachometer and
Speedometer).
Cruise Control: Sets and controls the speed of the engine for
cruising. (Smart Tow Tachometer only).
Launch Control: Sets and controls the speed of acceleration from
idle to set cruise speed. (Smart Tow Tachometer only).
Engine Guardian System: Monitors the critical sensors on the
engine for any early indications of problems. The system will
respond to a problem by reducing engine speed and alert the
operator to a potentially damaging situation.
Warning System: The system sounds the warning horn and
displays the warning message.

Master Reset

Returns the gauge to the factory defaults through the Master Reset
command.
2
5
1
6
0
7
System Tachometer
3
4
5
RPM x 1000
6
7
RESET
TROLL TROLL
-
+
MODE
1
30 40
20 50
SPEED
10 60
0 70
RESET
TROLL TROLL
-
MODE +
22642
System
Speedometer