Mercury SC1000 User Manual page 35

TACHOMETER CALIBRATION
CAL2 Tachometer Calibration - Tank 1 and 2 Level Calibration
CALIBRATING :
EMPTY TANK
THEN PRESS PLUS BUTTON
[SKIP]
CALIBRATING :
FILL TO 1/4
THEN PRESS PLUS BUTTON
[SKIP]
CALIBRATING :
FILL TO ½
THEN PRESS PLUS BUTTON
[SKIP]
CALIBRATING :
FILL TO 3/4
THEN PRESS PLUS BUTTON
[SKIP]
CALIBRATING :
FILL TO FULL
THEN PRESS PLUS BUTTON
[SKIP]
CALIBRATION 2
TANK 2 INPUT
OIL TANK
[DOWN] [SAVE]
EXTERNAL SENSORS
CAL2 Tachometer Calibration - External Sensors
CALIBRATION 2
EXTERNAL SENSORS ?
[SKIP]
CALIBRATION 2
EXTERNAL SENSORS
PITOT SENSOR ?
[ NO ] [SAVE]
CALIBRATION 2
EXTERNAL SENSORS
PADDLE SENSOR ?
[ NO ] [SAVE]
Empty the tank. Select "SAVE" to calibrate the
[SAVE]
23995
Fill the tank to 1/4 full. Select "SAVE" to calibrate
[SAVE]
24002
Fill the tank to 1/2 full. Select "SAVE" to calibrate
[SAVE]
24003
Fill the tank to 3/4 full. Select "SAVE" to calibrate
[SAVE]
24004
Fill the tank to full. Select "SAVE" to calibrate
[SAVE]
24005
Select tank 2 input: oil tank, fuel tank 2, water
tank, waste tank, or not installed.
[ UP ]
24148
Selects and calibrates external sensors that are
installed in the system. Select [SKIP] to proceed
to the speed options. Select [EDIT] to proceed
[EDIT]
24006
Is the boat equipped with a pitot sensor to
measure boat speed? Press "-" to select no or
YES
[YES ]
24007
Is the boat equipped with a paddle wheel to
measure boat speed? Press "-" to select no or
YES
[YES ]
24008
31
tank level to empty.
the tank level to 1/4 full.
the tank level to 1/2 full.
the tank level to 3/4 full.
the tank level to full.
to external sensor selection.
"+" to select yes.
"+" to select yes.