Mercury SC1000 User Manual page 32

TACHOMETER CALIBRATION
Tachometer CAL 1 Calibration - Trim
CALIBRATION 1
TRIM FULL DOWN
THEN PRESS PLUS BUTTON
[DFLT] [SKIP]
CALIBRATION 1
TRIM FULL UP
THEN PRESS PLUS BUTTON
[DFLT] [SKIP]
CALIBRATION 1
TRIM TO TRAILER POINT
THEN PRESS PLUS BUTTON
[DFLT] [SKIP]
Tachometer CAL 1 Calibration - Display Units
DISPLAY UNITS
ENGLISH
[DOWN] [SAVE]
SPEED UNITS
MPH
[DOWN] [SAVE]
Tachometer CAL 1 Calibration - Display Screens
QUICK REF SCREEN ?
[ NO ] [SAVE]
ENGINE TEMP SCREEN ?
[ NO ] [SAVE]
OIL TEMP SCREEN ?
[ NO ] [SAVE]
OIL PRESS SCREEN ?
[ NO ] [SAVE]
Trim the system to the full down position then
press the "+" button to save the setting.
[SAVE]
23911
Trim the system to the up position then press
the "+" button to save the setting.
[SAVE]
23912
Trim the system to the trailer point then press
the "+" button to save the setting.
[SAVE]
23919
Changes units of measure between English
(standard) or Metric. Select "DOWN" or "UP" to
change between "ENGLISH" or "METRIC" units
[ UP ]
23539
Changes the units in which speed is displayed.
Choose from: MPH (Miles Per Hour), KN
[ UP ]
(Knots), or KMH (Kilometers Per Hour).
23540
The quick reference screen is displayed ("YES")
[ YES ]
23978
The engine temperature screen is displayed
[ YES ]
23783
The oil temperature screen is displayed ("YES")
[ YES ]
23786
The oil pressure screen is displayed ("YES") or
[ YES ]
23787
of measure.
or off ("NO").
("YES") or off ("NO").
or off ("NO").
off ("NO").
28