Mercury SC1000 User Manual page 33

TACHOMETER CALIBRATION
Tachometer CAL 1 Calibration - Display Screens
TRIM AND PSI SCREEN ?
[ NO ] [SAVE]
WATER PSI SCREEN ?
[ NO ] [SAVE]
TRIM AND RPM SCREEN ?
[ NO ] [SAVE]
RPM SCREEN ?
[ NO ] [SAVE]
FUEL USED SCREEN ?
[ NO ] [SAVE]
VOLT / HOUR SCREEN ?
[ NO ] [SAVE]
SPEED / SEA SCREEN ?
[ NO ] [SAVE]
DEPTH SCREEN ?
[ NO ] [SAVE]
SIMULATOR MODE
NO
[ NO ] [SAVE]
SIMULATOR MODE
EXIT ?
[ NO ] [ YES ]
The split screen showing trim angle and water
pressure is displayed ("YES") or off ("NO").
[ YES ]
23788
The water pressure screen is displayed ("YES")
[ YES ]
23789
The split screen showing trim angle and engine
RPM is displayed ("YES") or off ("NO").
[ YES ]
23979
The engine RPM screen is displayed ("YES") or
[ YES ]
23980
The fuel used screen is displayed ("YES") or off
[ YES ]
23981
The split screen showing volts and engine hours
is displayed ("YES") or off ("NO").
[ YES ]
23982
The split screen showing speed and sea
temperature is displayed ("YES") or off ("NO").
[ YES ]
23983
The depth screen is displayed ("YES") or off
[ YES ]
23984
Enables the simulation mode. (Used for
[ YES ]
23547
Press "MODE/SELECT" to exit. Press "-" to go
to the start of CAL 1. Press "+" to continue to
[CAL 2]
23549
29
or off ("NO").
off ("NO").
("NO").
("NO").
demonstration purposes only).
CAL 2.