Speedometer Calibration; Speedometer Quick Cal Calibration; Speedometer Cal 1 Calibration - Mercury SC1000 User Manual

SPEEDOMETER CALIBRATION

Speedometer Quick CAL Calibration

This calibration is for setting the lighting and contrast.
1. Press the "MODE" and "+" buttons simultaneously for two
seconds to bring up the Quick Cal display screen.
2. Press the "-" or "+" button to select the option choice displayed
in the [ ] brackets on the screen.
3. Press "MODE" ["SAVE"] to save the setting and advance
through the calibration selections.
LIGHT
(DOWN) (SAVE)
CONTRAST
(DOWN) (SAVE)

Speedometer CAL 1 Calibration

This calibration allows you to turn on and off the system display
screens.
NOTE: Screens may vary depending on your engine type.
1. Press the "MODE" and "+" buttons simultaneously for
approximately six seconds to bring up the Cal 1 display
screen.
30 40
20
SPEED
10
0
RESET
TROLL
-
MODE
SC1000 System Speedometer
Quick CAL
Adjusts the brightness of the gauge lighting.
( UP )
23517
Adjusts the contrast of the display screen.
( UP )
23519
50
60
70
TROLL
+
24159
22