Table of Contents
Advertisement
D7.3L D-TRONIC DIESEL ENGINES - BRAVO MODELS
Sterndrive Unit Installation
1. Remove trim cylinders' support and dust cover from bell housing studs. Retain locknuts
and flat washers.
2. Remove cap and fill gear lube monitor.
3. Push in on dribble valve until gear lube appears.
4. Once gear lube appears, release dribble valve.
5. Fill monitor to FILL mark.
6. Replace monitor cap.
Page 62 of 90
Gear Lube Monitor
a -
Cap
b -
Dribble Valve
a -
b
a
a
75955
72471
Advertisement
Table of Contents
