Install Pilot Injection Actuator; Assemble Boost Compensator - Toyota 2L-T Repair Manual

FUEL SYSTEM
-
Injection Pump
FU-19
(2L-T Austria)
a
INSTALL PI LOT INJECTION (PIJ) ACTUATOR
(a) Install a new O-ring to the PIJ actuator.
(b) Using the PIJ socket, install the PIJ actuator.
Part No. 95096-10380 (NIPPONDENSO)
Torque:
900 kgcm (65 ft-lb, 88 N m )
NOTICE:
Check that the PIJ actuator and injection are
clean and free of foreign material.
(2 L-T)
ASSEMBLE BOOST COMPENSATOR
lnstall No. 2 overflow screw
Install the No..2 overflow screw and cover.
Install control lever
(a)
Insert the connecting pin into the governor cover.
(b) Using a 4 mrn hexagonal wrench, install the plug with
a new gasket.
(c)
Using a small screwdriver, install the control lever
with the support pin.