Toyota 2L-T Repair Manual page 94

FU-20
FUEL SYSTEM
-
Injection Pump
I
Attachment Measure
Control Lever
(d) Using a 4 mm hexagonal wrench, install two new gas-
kets and the two bolts.
Install guide bus
Install boost compensator diaphragm
(a)
Install the attachment measure to the governor cover.
Part No. 95096-10330 (Nl PPONDENSO)
(b) Measure the distance between the end surface of the
control lever and the attachment measure.
(1) l nstall the shim and diaphragm.
HINT:
Do not assemble the spring.
(2) With the push rod against the
@
surface (flat
part), measure dimension "L2" with vernier
calipers as shown.
Dimension "L2":
Austria
Approx. 10.75 mm (0.4232 in.)
Others
Approx. 10.39 mm (0.4091 in.)
HINT: Dimension "L1" of attachment measure is 10
mm (0.39 in.).