Toyota 2L-T Repair Manual page 121

FUEL SYSTEM
-
lniection P u m ~
FU-47
CONNECT FUEL HOSES TO INJECTION PUMP
CONNECT INJECTION PUMP CONNECTOR(S)
(2 L-T)
CONNECT WATER BY-PASS HOSES TO THERMO WAX
(w/ AIC)
CONNECT AIC IDLE-UP VACUUM HOSE
(2 L-T)
CONNECT BOOST COMPENSATOR HOSE
INSTALL ACCELERATOR LINKAGE
INSTALL INJECTION PUMP DRIVE PULLEY
Torque:
650 kg-cm (47 ft-lb, 64 N.m)
SET NO. 1 CYLINDER TO TDCICOMPRESSION
INSTALL TIMING BELT
CHECK VALVE TIMING
INSTALL NO. 1 TIMING BELT COVER
INSTALL CRANKSHAFT PULLEY
Torque:
1,700 kg-cm (123 ft-lb, 167 N-m)
INSTALL WATER PUMP PULLEY, FLUID COUPLING
AND FAN
(2L-T)
INSTALL TURBO WATER HOSE
(2 L-T)
FILL WITH ENGINE COOLANT (See page CO-5)
START ENGINE AND CHECK FOR FUEL LEAKS
CHECK IDLE SPEED AND MAXIMUM SPEED
(See page EM-27)