Back Inclination - Vermeiren Sagitta Installation Manual

Adjust the length of the foot bracket as follows:
1. Loosen screw at the end of the foot support frame on the left and right side.
2. Adjust the length of the foot bracket to a comfortable length.
3. Tighten the screw  on both sides by hand.
Do not switch the tubes of the foot bracket.
4.6

Back inclination

The tilt angle of the back is adjustable from -7° to 7° for each
back tube separately.
Turn the button on the bottom of the back to the left, the back
tube adjusted to the rear.
Turn the button on the bottom of the back to the right, the
back tube moved forward.
Make sure that the two back tubes have a uniform slope.
Adjust the angle of the back only when the back is
unloaded.
Installation manual
10
Sagitta, Sagitta SI
2023-07
Assembly and adjustments
EN
NL