Mercedes-Benz 2006 R 350 Operator's Manual page 41

Getting started
Unlocking
1 KEYLESS-GO start/stop button
2 Starter switch
KEYLESS-GO start/stop button
3 USA only
4 Canada only
40
The SmartKey with KEYLESS-GO must be
located in the vehicle.
Insert KEYLESS-GO start/stop
button 1 into starter switch 2 (if not
inserted already).
Make sure the automatic transmission
is set to P.
Do not depress the brake pedal.
Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle's on-board
electronics have status 0 (as with
SmartKey removed).
Position 1
Press the KEYLESS-GO start/stop but-
ton once.
This supplies power for some electrical
consumers, such as seat adjustment.
i
If you now press the KEYLESS-GO
start/stop button
once more, the ignition (position 2)
is switched on
twice more, the power supply is
again switched off
Ignition (or Position 2)
Press the KEYLESS-GO start/stop but-
ton twice.
This supplies power for all electrical
consumers.
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary. If
a lamp in the instrument cluster re-
mains on after starting the engine or
comes on while driving, refer to "Lamps
in instrument cluster" ( page 404).