Table of Contents
Advertisement
Controls in detail
Control system
Setting night security illumination
(Headlamps delayed shut-off)
Use this function to set whether and for
how long you would like the exterior lamps
to remain on during darkness after exiting
the vehicle and the doors closed.
With the delayed shut-off feature activated
and the exterior lamp switch in
position U before the engine is turned
off, the following lamps will switch on
when the engine is turned off:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
Front fog lamps*
If after turning off the engine you do not
open a door, the lamps will switch off auto-
matically after 60 seconds.
184
Move the selection marker with
button æ or ç to the
Lighting
submenu.
Press button j or k repeatedly
until the message
Headlmp. delayed
shut-off
appears in the multifunction
display.
The selection marker is on the current
setting.
Press button æ or ç to select
the desired lamp-on period.
You can select:
0 sec.
, the delayed shut-off feature
is deactivated.
15 sec.
,
30 sec.
,
45 sec.
60 sec.
, select the desired lamp-on
period.
Turn the exterior lamp switch to
position U ( page 147) before
turning off the engine.
The headlamps delayed shut-off
feature is activated.
or
Advertisement
Table of Contents
