Table of Contents
Advertisement
To move seat backrest back, lean
lightly against backrest.
To move seat backrest forward, lean
forward with handle 1 pulled.
The seat backrest will move forward
against your back.
Release handle 1 when the seat back-
rest has reached the desired position.
To make sure the seat backrest has en-
gaged, lean firmly against the backrest.
Head restraint height
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Second-row seat head restraint
1 Head restraint
2 Release button
Controls in detail
Raising:
Manually adjust the height of head
G
restraint 1 by pulling it upward to the
desired position.
Lowering:
To lower head restraint 1, push
release button 2 and press down on
head restraint 1.
i
The third-row seat head restraints are
adjusted in the same manner.
i
The tilt of the second-row head re-
straints is adjusted in the same manner
as the front-seat head restraints, see
"Head restraint tilt" ( page 45).
The tilt of the third-row head restraints
cannot be adjusted.
Seats
139
Advertisement
Table of Contents
