Mercedes-Benz 2006 R 350 Operator's Manual page 189

Controls in detail
Control system
Drive a full circle at a vehicle speed of
between 3 mph and 6 mph (5 km/h
and 10 km/h).
When calibration was successful, the
following message appears in the mul-
tifunction display:
Compass Calibration
Completed Successfully
i
If the message Compass Calibration
Completed Successfully
pear in the multifunction display, drive
another full circle.
If calibration does not succeed within
3 minutes, the message
ibration appears in the multifunction
display again. Calibrating the compass
has failed due to outside influences.
Repeat compass calibration in a differ-
ent location.
188
Setting which display to appear with
ignition switched off
This function lets you determine which dis-
play you would like to appear in the multi-
function display when you switch off the
ignition.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
does not ap-
ignition is switched off
the multifunction display.
The selection marker is on the current
setting.
Compass Cal-
Press button æ or ç to select
the desired setting.
Setting automatic locking
Use this function to activate or deactivate
the automatic central locking. With the
automatic central locking system
activated, the vehicle is centrally locked at
vehicle speeds of approximately 9 mph
(15 km/h).
Vehicle Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
Display when
appears in until the message
lock
display.
The selection marker is on the current
setting.
Press button æ or ç to switch
the automatic central locking
Vehicle
Automatic door
appears in the multifunction
on or off .