Table of Contents
Advertisement
Pull release handle 2.
The front part of center console 1 is
released from base 3.
Lift center console 1 in direction of
arrow 4 and hold it there.
While holding center console 1 up,
grip handle 5.
Lift center console 1 at rear
handle 5 to release the center con-
sole from anchorage points 6.
Take center console 1 out of the vehi-
cle.
i
Rear center console base 3 cannot be
removed.
Installing
Warning!
The rear center console must be properly in-
stalled on the center console base. Driving
with the rear center console not properly in-
stalled on the rear center console base may
cause the rear center console to come loose
and be thrown around in the vehicle interior,
causing injury to vehicle occupants during
braking
vehicle maneuvers
an accident
Controls in detail
You can install the rear center console in
two different positions. In the most for-
G
ward position (position 1) you can expand
the cargo compartment fully ( page 284)
without removing the rear center console.
However, for the storage compartment
and the cupholders in the rear center con-
sole to be illuminated, the rear center con-
sole must be installed in the most rearward
position (position 0).
1 Latch (position 1)
2 Latch (position 0)
3 Rear center console base
4 Anchorage point (position 1)
5 Anchorage point (position 0)
Useful features
309
Advertisement
Table of Contents
