Table of Contents
Advertisement
Operation
Tires and wheels
Switch on the ignition ( page 38).
Make sure the standard display menu
appears in the multifunction display
( page 168).
Press button k or j repeatedly
until the following message appears in
the multifunction display:
Press button æ.
The following message will appear in
the multifunction display:
Tire pressure now OK?
368
If you wish to confirm activation:
Press button æ.
The following message will appear in
the multifunction display:
Run Flat Indicator
reactivated
After a certain "learning phase", the Run
Flat Indicator checks the set pressure
values for all four tires.
If you wish to cancel activation:
Press button ç.
or
Wait until the message
Tire pressure now OK?
disappears.
Checking tire pressure electronically
with the Tire Pressure Monitoring
System (TPMS), (USA only)
i
The Tire Pressure Monitoring System
(TPMS) is equipped with a combination
low tire pressure/TPMS malfunction
telltale in the instrument cluster
( page 24). Depending on how the
telltale illuminates, it indicates a low
tire pressure condition or a malfunction
in the TPMS system itself:
If the telltale illuminates continu-
ously, one or more of your tires is
significantly underinflated. There is
no malfunction in the TPMS.
If the telltale flashes for 60 seconds
and then stays illuminated, the
TPMS system itself is not operating
properly.
Advertisement
Table of Contents
