Mercedes-Benz 2006 R 350 Operator's Manual page 188

Press button j or k repeatedly
until the message Compass Adjustment
appears in the multifunction display.
The selection marker is on the current
setting.
Press button æ or ç to set the
respective compass zone.
For information on how to select the prop-
er geographic zone, see "Compass"
( page 327).
Compass calibration
This function is not available if your vehicle
is equipped with the Modular COMAND
system with navigation module*.
In order to calibrate the compass properly,
mind the following:
Calibrate the compass in open terrain.
Nearby buildings, bridges, power lines
and large antenna masts, for example,
could impair compass calibration.
Switch off electrical consumers (e.g.
climate control, windshield wipers, or
rear window defroster).
Close all doors and the tailgate.
Start the engine ( page 53).
Press button æ or ç to move
the selection marker to the
submenu.
Press button j or k repeatedly
until the message
tion appears in the multifunction
display.
The selection marker is on setting
Press button æ or ç to set the
selection marker to
The following message appears in the
multifunction display:
Compass Calibration Active
Please drive in a full circle
Vehicle
Controls in detail
Control system
Compass Calibra-
off .
Start .
187