Table of Contents
Advertisement
Controls in detail
Power windows
Fully opening the door windows
(Express-open)
Press switch 1, 2, 3, or 6
( page 248) past the resistance point
and release.
The corresponding door window opens
completely.
Fully closing the door windows
(Express-close)
Pull switch 1, 2, 3, or 6
( page 248) past the resistance point
and release.
The corresponding door window closes
completely.
Warning!
Driver's door only:
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not function.
250
If the upward movement of a door window
is blocked during the closing procedure,
the door window will stop and open slight-
ly.
Remove the obstruction.
Pull the respective power window
switch past the resistance point again
and release.
i
If the door window still does not close
when there is no obstruction, pull and
hold the respective power window
switch. The door window will then close
without the obstruction sensor
function.
G
Stopping door windows during
Express-operation
Press or pull the respective door win-
dow switch again.
Hinged quarter windows
The switches for opening and closing the
hinged quarter windows are located on the
door control panel of the driver's door
( page 34).
1 Hinged quarter windows: opening
2 Hinged quarter windows: closing
Opening
Press and release switch 1.
To stop the hinged quarter window:
Press and release switch 1 once
more.
Advertisement
Table of Contents
