Controls in detail
Loading
Removing partition net
Release tensioning of the strap by pull-
ing tensioner 1 down.
Disengage hook 2 from tie-down
ring 3.
Remove mounting hooks 2 from
holder 1, see "Engaging partition net"
( page 291).
Roll up the partition net.
Press the red button on the partition
net bar.
Fold partition net bar.
Roll up the partition net.
Close zipper on partition net package.
292
Tightening partition net in third row
1 Hook
2 Tie-down ring
Insert hook 1 in tie-down ring 2.
3 Partition net ring
4 Tensioner hook
5 Tensioner
Pull tensioner 5 up in direction of ar-
row towards partition net ring 3.
Insert tensioner hook 4 in partition
net ring 3 located at lower edge of the
partition net.
Release tensioner 1.