Table of Contents
Advertisement
Switch off the ignition ( page 38) and
remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
Switch off the ignition ( page 39).
Open the driver's door (this puts the
starter switch in position 0, same as
with the SmartKey removed from the
starter switch). The driver's door then
can be closed again.
Remove the fuse securing the
tilt/sliding panel from the fuse box
( page 504).
i
For information on which fuse box con-
tains the fuse for the power tilt/sliding
panel, see the fuse chart provided with
the vehicle tool kit ( page 455).
Panorama roof with power tilt/sliding panel*
Reinsert the fuse in the fuse box.
Switch on the ignition ( page 38).
Push and hold the roof panel switch in
direction of arrow 2 ( page 260) un-
til the roller sunblinds are fully closed.
Keep holding the roof panel switch in
direction of arrow 2 ( page 260) for
approximately 1 second.
Pull and hold the roof panel switch in
direction of arrow 1 ( page 260) un-
til the roller sunblinds are fully opened.
Keep holding the roof panel switch in
direction of arrow 1 ( page 260) for
approximately 1 second.
Press and hold the roof panel switch in
direction of arrow 3 ( page 260) un-
til the tilt/sliding panel is fully raised at
the rear.
Controls in detail
Push and hold the roof panel switch in
direction of arrow 2 ( page 260) un-
til the tilt/sliding panel is fully closed.
Keep holding the roof panel switch in
direction of arrow 2 ( page 260) for
approximately 1 second.
Open the tilt/sliding panel using the
Express-open feature ( page 262).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized.
If the tilt/sliding sunroof does not open
completely:
Repeat the above steps.
263
Advertisement
Table of Contents
