Table of Contents
Advertisement
i
Reactivate the TPMS after adjusting
the tire inflation pressure to the infla-
tion pressure recommended for the
vehicle operating condition. Tire pres-
sure should only be adjusted on cold
tires. Observe the recommended tire
inflation pressure on the placard on the
driver's door B-pillar ( page 357).
Some vehicles may have supplemental
tire pressure information for driving at
high speeds ( page 364) or for vehicle
loads less than the maximum loaded
vehicle condition ( page 364). If such
information is provided, it can be found
on the inside of the fuel filler flap.
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu
appears in the multifunction display
( page 168).
Press the j or k button repeat-
edly until you see the following
message:
Tire pressure monitor
active
Reactivation possible:
R-button
Press the reset button ( page 158).
The following message will appear in
the multifunction display:
Check current
tire pressure?
Press the æ button.
The following message will appear in
the multifunction display:
Tire pressure monitor
reactivated
The TPMS will now monitor the tire in-
flation pressure values of all four tires.
If you wish to cancel activation:
Press the ç button.
Tires and wheels
Checking tire pressure electronically
with the Advanced Tire Pressure Moni-
toring System* (Advanced TPMS*),
(Canada only)
i
The Advanced Tire Pressure Monitoring
System* (Advanced TPMS*) is
equipped with a combination low tire
pressure/TPMS malfunction telltale in
the instrument cluster ( page 24). De-
pending on how the telltale illuminates,
it indicates a low tire pressure condi-
tion or a malfunction in the TPMS sys-
tem itself:
If the telltale illuminates continu-
ously, one or more of your tires is
significantly underinflated. There is
no malfunction in the TPMS.
If the telltale flashes for 60 seconds
and then stays illuminated, the
TPMS system itself is not operating
properly.
Operation
371
Advertisement
Table of Contents
