Power-Up Screen; Op Er Ating Screen; Beltpack Ac Tiv Ity Code Def I Ni Tions - Telex RadioCom BTR-700 Operating Instructions Manual

Power-Up Screen

•
This screen is dis played only on power-up, first use de -
fault, and fac tory de fault.
• st
The 1 up per right cor ner num ber dis plays the base's soft -
ware re vi sion. The ver sion num ber in cre ments for
changes in op er a tional soft ware.
• nd
The 2 up per right cor ner num ber dis plays the base's
chan nel map (fre quency plan) ver sion. The ver sion num -
ber in cre ments for changes in the chan nel map.
•
Once the power-up screen is dis played, it will change to
the op er at ing screen af ter a few sec onds.

Op er ating Screen

•
Screen is dis played af ter power-up screen.
•
Sys tem will re vert to this screen if no ac tiv ity is de tected
on the LCD dis play but tons af ter 3 min utes.
•
Screen dis plays cur rent sta tus of the sys tem.

Beltpack Ac tiv ity Code Def i ni tions:

no tx = No Beltpack Trans mit Car rier De tected
Off = Re ceiver is not se lected on front panel
Tx = Beltpack is on
Power-Up Screen
Telex
RadioCom
Operating Screen
Group 03A
T1
Tx
On
6-5
S S B20001
C60001
TM
no tx
R1
Off
2 2
3 3
Tx
4 4
Tx