Elation Design LED 36MH User Manual page 29

11. EDIT MENU
- This menu item allows you to write a program into the fixture's internal memory
(EEPROM) via the control panel or via an external DMX controller.
STEP (S-01 - S-48) – This set the total amount of scenes in the user program. There is a
maximum of 48 scenes available.
SCXX (SC01 – SC48) - These are the scenes that are stored in your program. There are a
total of 48 scenes. C-01 ~ C-12 (Channel 1 ~ Channel 12) – Represents the total fixture
channels for each scene that can be edited.
TIME (Time) - Running time of the entire program.
CEDT - Edit program using a external controller.
RUN – Program test mode.
CEDT- Records scenes automatically from any external DMX controller and stores them
inside the fixtures built-in memory. These scenes can then be recalled without the use of
an external controller.
1. Access the main menu.
2. Tap the UP or DOWN buttons until "EDIT" is displayed, then press ENTER.
3. Tap the UP or DOWN buttons until "REC" is displayed, then press ENTER.
4. After entering the REC function the display will read "RE.XX," where as "XX"
represents the scene number in the internal memory to which the scene will be
stored.
5. Press the UP or DOWN buttons to select the desired scene number.
6. When you reach the scene number you wish to store the scene to, press ENTER
to confirm and lock the scene into the fixture's memory.
7. Press MODE/ESC to return to the main menu.
STEP
- With this function you can program the number of steps in your individual
©Elation Professional®
Design LED 36MH™
Design LED 36MH™
29