Fixture Menu - Elation Design LED 36MH User Manual

9. FIXTURE MENU

On-Board System Menu: The DESIGN LED 36MH™ comes with an easy to navigate
system menu. This next section will detail the functions of each command in the system
menu.
LED Control Panel: The control panel located on the top, front of the fixture allows you to
access the main menu and make all necessary adjustments to the Design LED 36MH™.
During normal operation, tapping the "MODE/ESC" key once will access the fixture's main
menu. Once in the main menu you can navigate through the different functions and access
the sub-menus with the Up and Down buttons. Once you reach a field that requires adjusting,
tap the ENTER button to activate that field and use the UP and Down button to adjust the
field. Tapping the Enter button once more will confirm your setting. Once a setting is saved
the LED will briefly readout PASS to confirm a new setting has been made and locked into
memory. You may exit the main menu at any time without making any adjustments by tapping
the MODE/ESC button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of
the unit. Press this button to activate the system menu. Tap the UP button until you reach the
function you wish to change. When you reach the function you wish to change tap the ENTER
button once to select that menu function. When a function is selected the menu will begin to
flash, use the UP or DOWN button to change the function. Once your changes are made tap
the ENTER button yet again to lock the change in the system menu. To exit without making
any changes tap the MODE/ESC button.
Default settings shaded.
0 ADDR A001~A511
1 TEST T-01~T-XX
2 AUDI MSTR
©Elation Professional®
Indicate the staring DMX address.
Set all slave units to A001 in
Master-Slave mode.
Automatically test all function
Runs fixture as a master unit for
audio Master-Slave mode.
Design LED 36MH™
Design LED 36MH™
19