Elation Design LED 36MH User Manual page 30

Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01," this indicates the first step of your program. You can
call up to 48 scenes in "Run." For example; if "S-05" is displayed, it means that
the scene will "RUN" the first 5 scenes you saved in "Edit."
5. Press ENTER to save and MODE/ESC to exit.
SC01
- This function allows you to choose the total number of scenes in your internal
program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "SC01" is displayed.
4. The display indicates "SC01," this stands for the first scene of your program. You
may recall up to 48 scenes. For example, if you choose "SC05," and then select
the "Run" function, the first 5 scenes you saved in "Edit" mode will run.
5. Press ENTER to save and MODE/ESC to exit.
Editing procedure 1: Using the control board only.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed and press ENTER.
3. The display will show "SC-01", this stands for the scene number. For example,
"SC-01" is displayed, it means you will be editing scene 1, press ENTER. You can
change the scene number by tapping the UP button.
4. Press ENTER, the display will show "C-01," this represents the channel number. If
"C-01" is displayed, you will be editing the fixture's channel 1 value of the
selected scene, press ENTER. You can change the channel number by tapping
the UP button.
5. The display will show the DMX value for the channel that is being edited. It will be
displayed as "11XX," it stands for Channel 11 of the editing scene, the DMX value
©Elation Professional®
Design LED 36MH™
Design LED 36MH™
30