Elation Design LED 36MH User Manual page 22

channels. For example: If you press the up button until "T-03" is displayed, the unit will
test the color channel, changing the color one by one and show the rainbow effect
with different speeds.
4. Press MODE/ENTER or EXIT to exit.
3. AUDIO MENU -
MSTR (Master) – Runs fixture in audio mode as a master unit in Master-Slave mode.
ALON (Alone) – Runs fixture in audio mode as a single unit in Stand-Alone operation.
MSTR - This feature is used to run the internal preset programs in AUDIO mode in a
Master/Slave configuration. Follow the procedure below for Master-Slave operation:
1. Access the main menu.
2. Tap the UP or DOWN button until "AUDI" is displayed, press ENTER.
3. Tap the UP or DOWN button until "MSTR" is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
5. Set the DMX address to 001 for all slave units.
ALON – This feature is used to run the internal preset programs in AUDIO mode in a
Stand-Alone configuration (single fixture mode). Follow the procedure below for
Stand-Alone operation:
1. Access the main menu.
2. Tap the UP or DOWN button until "AUDI" is displayed, press ENTER.
3. Tap the UP or DOWN button until "ALON" is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
4. RESE (RESET) MENU -
ALL - Resets all the motors in the unit.
SCAN - Resets the Pan and Tilt motors.
©Elation Professional®
Design LED 36MH™
Design LED 36MH™
22