Seat Catch And Helmet Hooks - Ducati Super Sport SS800 Owner's Manual

Seat catch and helmet hooks

E
Opening (fig. 22)
Fit the ignition key into the lock (1) and turn the key clockwise
until the rear end of the seat lifts up. Pull the seat backwards
to slide it off its front holders (3).
At the front end of the compartment underneath the seat,
there are the helmet hooks (2, fig. 23) for rider and pillion
rider helmets. Hook the helmet straps onto the hooks and
leave the helmets hanging outside. They will be locked safely
when you refit the seat.
Warning
This system is intended to lock your helmet safely
when you park your motorcycle. Never leave the helmet
hanging from the hook when riding or it may get in the way
and make you lose control of the motorcycle.
Closing
Make sure that all parts are arranged and secured properly
inside the compartment under the seat. Slide the front ends
(3) of the seat bottom underneath the frame U-bolt and push
down on the rear end of the seat until you hear the catch
click. Make sure the seat is firmly secured to the frame and
take the key out of the lock (1).
28
0
1
1
3
fig. 22
2
fig. 23