About The Touchscreen Control - Honeywell LYNX Touch User Manual

SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW

About the Touchscreen Control

**IMPORTANT**
If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred
during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY
and CONTACT THE POLICE from a nearby safe location.
The touchscreen icons and keys allow you to control all system functions. Additionally, the
touchscreen display shows the zone and description of all system occurrences. When the
speaker phone mode is active, a full-function telephone keypad is displayed on the
touchscreen.
The system also features a built-in sounder, which will sound during alarms and troubles
and a built-in speaker announces system status. Additionally, the system "beeps" during
certain system functions, such as during entry/exit delay times, in Chime mode, and when
depressing any of the keys (to acknowledge the key press).
The voice announcement volume is adjustable, however the "beeps" that sound in response to
alarms always sound at the maximum volume level. All other "beeps" (trouble, chime,
exit/entry, etc) can be set to either low or high volume.
➴ ➷ ➬ ➮ ➱ ➷ ➮ ➴ ➱ ✃
➾ ➚ ➚ ➚ ➪ ➶ ➚ ➚ ➪ ➚ ➚ ➹ ➪ ➘ ➚
❁ ➼ ➽ ❁