Honeywell LYNX Touch User Manual page 40

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Message Recording and Playback
If you are trying to record a new message and the message center is already full, Add New will not
➢ ➤ ➦
be displayed. If the message center is full all old messages must be deleted before new messages
can be recorded. See Deleting Messages section.
➸ ➯ ➨ ➲ ➸ ➳ ➫ ➵ ➵ ➸ ➲ ➫ ➵
➫ ➫ ➩ ➯ ➨ ➲ ➳ ➫ ➵ ➵ ➸ ➲ ➫ ➵
6. When you have finished recording, select
. The system displays the recorded
messages.
7. To record additional messages (if recording
time is available) repeat steps 1 through 3.
1. At the Message screen, select the
message you wish to play.
2. Select Play , the system plays your
message.
3. When you are finished listening to the
message, you may select. Stop . If Stop
is not selected the system continues to
play the remaining messages.
4. When you have finished listening to the
messages, select
to the Home Screen.
1. At the Message screen, select Delete All .
The system deletes all messages.
2. When you have finished deleting the
messages, select
to the Home Screen.
– 40 –
. The system returns
. The system returns