Yaesu FT2DR Instruction Manual page 37

Transmitting APRS
4
Press the
Select one of the following TYPEs.
OFF: Turn the SmartBeaconing function OFF
TYPE1: Recommended setting when moving at a high
speed in a car etc.
TYPE2: Recommended setting when moving at a low
speed such as a bicycle.
TYPE3: Recommended setting when walking at a low
speed etc.
5
Press
The selected TYPE is set, and the set mode is cancelled.
6
Touch [F MW] followed by [S.LIST]
The APRS STATION LIST screen will be displayed.
7
Touch followed by [BEACON]
will be displayed at the top right of the display.
This is a short-cut to [APRS] → [16 BEACON TX] in the
set mode.
SmartBeaconing is set when
hand corner of the display.
Tips
• If the [APRS] → [16 BEACON TX] setting is set to SMART in the set mode, the setting of the
BEACON INTERVAL will be ignored.
• This function can be selected only when the status of [APRS] → [27 SmartBeaconing] in the set
mode is set to TYPE 1 - TYPE 3, and [APRS] → [24 MY POSITION] is set to GPS.
*SmartBeaconing™ is a function provided by HamHUD Nichetronix.
beacons
®
key and turn the DIAL to select TYPE
appears at the top right-
36