Yaesu FT2DR Instruction Manual page 18

y Description of Station List Designators
Examples of 14 types of station list designators are described here. Refer to the description
page listed on the table for the detail screen.
Display
Mic-E: Displayed when a beacon of a microphone encoder station is
E
received
Position: Displayed when the beacon from a fixed station (FIXED) or a
P
mobile station (MOVING) is received
Position: Displayed when the beacon of a fixed station (FIXED) or a mobile
p
station (MOVING) is received (compression type)
Weather report: Displayed when the beacon of a meteorological station is
W
received
Weather report: Displayed when the beacon of a meteorological station is
w
received (compression type)
O Object: Displayed when the beacon of an object station is received
Object: Displayed when the beacon of an object station is received
o
(compression type)
I Item: Displayed when the beacon of an item station is received
Item: Displayed when the beacon of an item station is received (compression
i
type)
Killed Object/Item: Displayed when a deleted object station or item station is
K
received
Killed Object/Item: Displayed when a deleted object station or item station is
k
received (compression type)
S Status: Displayed when the beacon of a status station is received
? Other: Displayed when a beacon that cannot be interpreted is received
Emg Displayed when an emergency signal from a Mic-E station is received
Tips
• When the transceiver is turned ON, if the detail screen is displayed before the GPS satellites are
acquired, the position arrow and distance will not be displayed.
• If GPS satellite information is no longer available due to obstructions such as buildings, tunnels,
etc., the most recently acquired coordinates (position arrow, latitude / longitude, distance) will be
displayed. The accurate position information will be displayed again when you move to a position
that can be located.
Description
17
Receiving APRS
®
beacons
Page
18
19-21
22
23
23
24
24
24
24
24
24
25
26
18