APRS
initial settings
®
APRS (Automatic Packet Reporting System) is a communication system to exchange
GPS location data and packet messages; it was developed and is supported by
Bob Bruninga (WB4APR). Position data may be entered manually in advance or
automatically from the built-in GPS satellite receiver.
When an APRS signal is received from a partner station, the direction, distance, speed
etc. of the partner station as seen from your own station will be shown on the display of
your transceiver.
Initial setting process for APRS operations
Enabling the GPS function
Turning the GPS function ON
(
P.3)
(
P.3)
Setting your own station call sign
Setting the APRS baud rate and turning ON the APRS
Setting the symbol of your own station
Setting the frequency in Band B
Setting the APRS beacon transmission according to your
operation preferences (
Disabling the GPS function
Turning the GPS function OFF
Setting the clock of this device
(
FT2DR Operating Manual P.44)
Setting the position of your own
(
P.8)
function (
P.9)
(
P.11)
(
P.15)
P.33)
2
(
P.4)
(
P.4)
station(
P.5)