Yaesu FT2DR Instruction Manual page 73

APRS Set mode function list
Mic-E: ON: Mic-E BEACON information (BEACON displayed as [E] on LIST) is
OFF: Mic-E BEACON information is not output when set to OFF.
POSIT: ON: POSITION BEACON information (BEACON displayed as [P] or [p]
OFF: POSITION BEACON information is not output when set to OFF.
WEATHER: ON: WEATHER BEACON information (BEACON displayed as [W] or [w]
OFF: WEATHER BEACON information is not output when set to OFF.
Tip
OBJECT: ON: OBJECT BEACON information (BEACON displayed as [O] or [o] on
OFF: POSITION BEACON information is not output when set to OFF.
ITEM: ON: ITEM BEACON information (BEACON displayed as [I] or [i] on LIST)
OFF: ITEM BEACON information is not output when set to OFF.
Tip
If you are to connect the transceiver with a PC using SCU-18, the following settings must be applied
on the PC.
DATA SPEED: 9600bps (the SPEED setting of this transceiver and a PC must correspond).
DATA LENGTH: 8bit
Parity Bit: None
Stop Bit: 1bit
output with WAPOINT data.
on LIST) is output with WAPOINT data.
on LIST) is output with WAPOINT data.
Because a Positionless type WEATHER BEACON does not have position
information, it does not output WAYPOINT DATA.
LIST) is output with WAPOINT data.
is output with WAPOINT data.
72