Yaesu FT-2000 - MENU MODE LIST Manual

Yaesu FT-2000 - MENU MODE LIST Manual

Hide thumbs Also See for FT-2000 - MENU MODE LIST:

Advertisement

M
M
ENU
ODE
The Menu system of the FT-2000 provides extensive customization capability, so you can set up your transceiver just the
way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from "001 AGc
FST DLY" to "149 tGEn EMRGNCY
FST DLY
FST DLY
FST DLY
FST DLY
149 tGEn EMRGNCY
149 tGEn EMRGNCY
149 tGEn EMRGNCY
149 tGEn EMRGNCY."
1. Press the [ MENU ] button momentarily, to engage the
Menu mode.
The Main (VFO-A) frequency display will show the
Menu Number and Menu Group name, while the Sub
(VFO-B) frequency display will show the Menu item;
the Multi-Display window shows the current setting of
the currently-selected Menu item.
2. Rotate the Main Tuning Dial knob to select the Menu
item you wish to work on.
3. Rotate the [ SUB VFO-B ] knob to change the current
setting of the selected Menu item.
A
:
DVICE
Press the [ CLEAR ] button momentarily to reset the
selected Menu item to the factory default value.
4. When you have finished making your adjustments,
press and hold in the [ MENU ] button for two seconds
to save the new setting and exit to normal operation. If
you only momentarily press the [ MENU ] button, the
new settings will not be retained.
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel [ POWER ] switch off.
2. Press and hold in the [ MENU ] button, and while holding it in, press the [ POWER ] switch to turn the transceiver
back on. Now release the [ MENU ] button.
Page 108
U
M
SING THE
ENU
Menu Number
Menu Mode Reset
[ CLEAR ] Button
[ MENU ] Button
[ SUB VFO-B ] Knob
Main Tuning Dial Knob
Menu Group Name
Menu Item
Menu Setting
FT-2000 O
PERATING
001 AGc
001 AGc
001 AGc
001 AGc
M
ANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Yaesu FT-2000 - MENU MODE LIST

  • Page 1 The Menu system of the FT-2000 provides extensive customization capability, so you can set up your transceiver just the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGc 001 AGc 001 AGc 001 AGc...
  • Page 2 ROUP UNCTION VAILABLE ALUES EFAULT ETTING 001 AGc FST DLY 20 ~ 4000 msec (20 msec/step) 300 msec 002 AGc FST HLD 0 ~ 2000 msec (20 msec/step) 20 msec 003 AGc MID DLY 20 ~ 4000 msec (20 msec/step) 700 msec 004 AGc MID HLD 0 ~ 2000 msec (20 msec/step)
  • Page 3 ROUP UNCTION VAILABLE ALUES EFAULT ETTING MODE-CW 054 A1A F-TYPE OFF / buG / ELE / ACS MODE-CW 055 A1A F-REV nor / rEU (REV) MODE-CW 056 A1A R-TYPE OFF / buG / ELE / ACS MODE-CW 057 A1A R-REV nor / rEU (REV) MODE-CW 058 A1A CW AUTO...
  • Page 4 ROUP UNCTION VAILABLE ALUES EFAULT ETTING SCOPE 107 SCP 1.8 FIX 1.800 - 1.999 MHz (1 kHz/step) 1.800 MHz SCOPE 108 SCP 3.5 FIX 3.500 - 3.999 MHz (1 kHz/step) 3.500 MHz SCOPE 109 SCP 5.0 FIX 5.250 - 5.499 MHz (1 kHz/step) 5.250 MHz SCOPE 110 SCP 7.0 FIX...
  • Page 5: Agc Group

    AGC G DISPLAY G ROUP ROUP 001 AGc FST DLY 007 diSP COLOR Function: Sets the delay time for the AGC FAST mode of Function: Selects the Display color when the optional Data the Main band (VFO-A) receiver. Management Unit (DMU-2000) is connected. Available Values: 20 ~ 4000 msec (20 msec/step) Available Values: bL1 / bL2 / bL3 / ub1 / ub2 Default Setting: 300 msec...
  • Page 6: Dvs Group

    DISPLAY G KEYER G ROUP ROUP 014 diSP QMB MKR 018 tEy BEACON Function: Enables/Disables the QMB Marker (White ar- Function: Sets the interval time between repeats of the row “ ”) to display on the Spectrum Band Scope when beacon message.
  • Page 7: General Group

    KEYER G GENERAL G ROUP ROUP 023 tEy CW MEM3 026 GEnE ANT SEL Function: Permits entry of the CW message for message Function: Sets the method of antenna selection. register 3. Available Values: bAnd / rEG Available Values: tyP1 / tyP2 Default Setting: bAnd Default Setting: tyP2 bAnd:The antenna is selected in accordance with the...
  • Page 8 GENERAL G ROUP 034 GEnE TRACK 038 GEnE SNB LVL Function: Sets the VFO Tracking feature. Function: Adjusts the Sub band (VFO-B) receiver’s IF Available Values: OFF / bAND / FrEq Noise Blanker level, when the Noise Blanker is engaged. Default Setting: OFF Available Values: nAin(MAIN) / 0~100 OFF:...
  • Page 9: Mode-Am Group

    S IF SFT MODE-AM G IF S ROUP ROUP HIFT 044 S-iF LSB SFT 052 A3E MICGAIN Function: Sets the center frequency of the Sub band (VFO- Function: Sets the microphone gain for the AM mode. B) receiver’s IF filter in the LSB mode. Available Values: Ur (VR) / 0 ~ 100 Available Values: –1000 ~ +1000 Hz (20Hz/step) Default Setting: 30...
  • Page 10: Mode-Cw Group

    MODE-CW G ROUP 054 A1A F-TYPE 058 A1A CW AUTO Function: Selects the desired keyer operation mode for Function: Enables/disables CW keying while operating the device connected to the front panel’s KEY jack. on SSB. Available Values: OFF / buG / ELE / ACS Available Values: OFF / 50 / On Default Setting: ELE Default Setting: OFF...
  • Page 11: Mode-Dat Group

    MODE-CW G MODE-DAT G ROUP ROUP 063 A1A FRQDISP 066 dAtA DATA IN Function: Selects the data input path to be used on the Function: Selects the frequency Display Format for the CW mode. PKT mode. Available Values: dir / OFSt Available Values: dAtA / PC Default Setting: OFSt Default Setting: dAtA...
  • Page 12: Mode-Fm Group

    MODE-FM G MODE-RTY G ROUP ROUP 074 F3E MICGAIN 078 rtty R PLRTY Function: Sets the microphone gain for the FM mode. Function: Selects normal or reverse Mark/Space polarity Available Values: Ur (VR) / 0 ~ 100 for RTTY receive operation. Default Setting: 50 Available Values: nor / rEU (REV) When this menu is set to “Ur (VR),”...
  • Page 13: J3E Tx Bpf

    MODE-SSB G RX AUDIO G ROUP ROUP 084 J3E MIC SEL 090 rout AGC SLP Function: Selects the microphone to be used on the SSB Function: Selects the gain curve of the AGC amplifier. modes (LSB and USB). Available Values: nor / SLP Available Values: Frnt / dAtA / PC Default Setting: nor Default Setting: Frnt...
  • Page 14: Rx Dsp Group

    RX DSP G ROUP 092 rdSP CNTR LV 098 rdSP PKT SHP Function: Adjusts the gain of the Contour filter. Function: Selects the passband characteristics of the DSP Available Values: –40 ~ +20 dB filter for the PKT mode. Default Setting: –15 dB Available Values: SOFt / ShAP Default Setting: ShAP 093 rdSP CNTR WI...
  • Page 15: Scope Group

    RX DSP G SCOPE G ROUP ROUP DVICE 104 rdSP SSB SHP This group’s adjustment has no effect, if the optional DMU- Function: Selects the passband characteristics of the DSP 2000 Data Management Unit is not connected. filter for the SSB modes (LSB and USB). 107 SCP 1.8 FIX Available Values: SOFt / ShAP Default Setting: ShAP...
  • Page 16: Tuning Group

    SCOPE G TUNING G ROUP ROUP 112 SCP 14.0 FIX 118 tun DIALSTEP Function: Setting of the Tuning Dial knob’s tuning speed Function: Selects the scan start frequency of the FIX mode Spectrum Scope while monitoring on the 20 m amateur except the FM and FM-PKT modes.
  • Page 17 TX AUDIO G ROUP 125 tAUd EQ1 FRQ 131 tAUd EQ3 FRQ Function: Selects the center frequency of the lower range Function: Selects the center frequency of the high range for the parametric microphone equalizer. for the parametric microphone equalizer. Available Values: OFF / 100 ~ 700 Hz (100 Hz/step) Available Values: OFF / 1500 ~ 3200 Hz (100 Hz/step) Default Setting: OFF...
  • Page 18: Tx Audio Group

    TX AUDIO G TX GNRL G ROUP ROUP 137 tAUd PE2 FRQ 143 tGEn BIAS This Menu item does not work. Please do not change Function: Selects the center frequency of the middle range for the parametric microphone equalizer when the speech this setting.

Table of Contents