Pci/Pnp Configuration - ECS GF8200SM-M3 User Manual

38
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
iGPU and Ext-VGA Selection
Init Display First
< >
iGPU and Ext-VGA Selection (Single)
Use this item to select internal VGA or external VGA card to display.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
Single
PCI
: Move Enter : Select +/-/: Value
F10: Save ESC: Exit
F1: General Help
F9: Load Default settings
Using BIOS
Help Item
Select Internal VGA or
External VGA CARD to
display