ECS GF8200SM-M3 User Manual page 20

16
Follow these instructions to install an add-on card:
1 Remove a blanking plate from the system case corresponding to the
slot you are going to use.
2 Install the edge connector of the add-on card into the expansion slot.
Ensure that the edge connector is correctly seated in the slot.
3 Secure the metal bracket of the card to the system case with a screw.
For some add-on cards, for example graphics adapters and network
adapters, you have to install drivers and software before you can begin
using the add-on card.
Table B: Supported VGA Card List for Hybrid SLI Technology
GPUs
GeForce 9800 GX2
GeForce 8500 GT
GeForce 8400 GS
Hybrid SLI Technology
Hybrid Power GeForce Boost
Yes
No
No
Installing the Motherboard
No
Yes
Yes