Checking Jumper Settings; Setting Jumpers - ECS GF8200SM-M3 User Manual

8
Do not over-tighten the screws as this can stress the motherboard.

Checking Jumper Settings

This section explains how to set jumpers for correct configuration of the motherboard.

Setting Jumpers

Use the motherboard jumpers to set system configuration options. Jumpers with
more than one pin are numbered. When setting the jumpers, ensure that the jumper
caps are placed on the correct pins.
The illustrations show a 2-pin jumper. When
the jumper cap is placed on both pins, the
jumper is SHORT. If you remove the jumper
cap, or place the jumper cap on just one pin,
SHORT OPEN
the jumper is OPEN.
This illustration shows a 3-pin jumper. Pins
1 and 2 are SHORT
Installing the Motherboard