ECS GF8200SM-M3 User Manual page 59

2 Press Y to clear the disk data.
The Array List screen appears, where you can review the RAID arrays that
you have set up.
Figure 1.10 Array List Window
Use the arrow keys to select the array that you want to set up, then press B
3
to specify the array as bootable.
4 Press Enter to view and verify details.
The Array Detail screen shows various information about the array that you
selected, such as Striping Block used, RAID Mode, Striping Width, Disk
Model Name, and disk capacity.
5 If you want to mark this disk as empty and wipe out all its contents, press C.
At the prompt, press Y to wipe out all the data, otherwise press N.
6
Press Enter again to go back to the previous screen and then press F10 to exit
7
the RAID setup.
NVIDIA RAID Configuration
55