Usb/Audio Board - HP Pavilion 11 x360 Maintenance And Service Manual

USB/audio board

Description
USB/audio board (includes cable)
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
To remove the USB/audio board:
1. Position the bottom cover upside-down.
2. Remove the Phillips PM2.0×3.0 screw (1).
3. Lift up on the rear of the board and lift the board off the bottom cover (2).
Reverse this procedure to install the USB/audio board.
34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 31).
Spare part number
755734-001