Power Button Board - HP Pavilion 11 x360 Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery.
Remove the power button board:
1. Disconnect the power button board cable (1) from the system board.
2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the power button board to the computer.
48 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 31).
Spare part number
755733-001