Osd Menu - Hall Research Technologies SC-VHD-HDMI User Manual

3.2 OSD Menu

Pressing the Menu button will bring up the OSD menu controls
on the screen. Use the up and down arrows to your desired item,
then press MENU to select and enter into sub menu. Select
EXIT from a submenu to go back to the main menu or from the
main menu to exit the OSD.
Top Menu
CONTRAST
BRIGHTNESS
FINETUNE
COLOR
SIZE
OUTPUT
AUDIO
OSD
INFORMATION
FACTORY RESET
MIRROR
EXIT
* The NATIVE output setting causes the scaler output to be the best
matched to the native resolution of the connected display.
PC (VGA) or YPbPr to HDMI™ Converter/Scaler
Sub-Menu
PHASE
CLOCK
H-POSITION
V-POSITION
RED
GREEN
BLUE
EXIT
FULL, OVERSCAN, UNDERSCAN, LETTERBOX, PANSCAN
SOURCE
DELAY
SOUND
EXIT
H-POSITION
V-POSITION
TIMER
BACKGROUND
0 to 100% (DEFAULT=50)
0 to 100% (DEFAULT=43)
0 to 100% (DEFAULT=0)
0 to 100% (DEFAULT=50)
0 to 100% (DEFAULT=50)
0 to 100% (DEFAULT=50)
0 to 100% (DEFAULT=47)
0 to 100% (DEFAULT=47)
0 to 100% (DEFAULT=47)
(DEFAULT=FULL)
NATIVE* , 640x480, 800x600, 1024x768, 1280x800,
1440x900, 1280x1024, 1400x1050, 1600x1200,
1680x1050, 1920x1200,
480i, 480p, 576i, 576p, 720p50, 720p60,
1080i50, 1080i60, 1080p50, 1080p60 (DEFAULT=NATIVE)
L/R or OPTICAL
OFF, 40 MS, 110MS or 150MS
0 to 100% (DEFAULT=10)
0 to 100% (DEFAULT=90)
0 to 100% (DEFAULT=10)
0 to 100% (DEFAULT=63)
SOURCE (Input Interface)
INPUT ( Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
Reset unit parameters to default state
OFF or ON (DEFAULT = OFF)
Value
ON or MUTE
EXIT OSD
5