Supports 4k uhd 60 hz 4:4:4, hdcp 2.2 and hdr de-embedded analog and digital audio outputs smart edid management can scale 4k to 1080p at each output (8 pages)
Video to pc/hdtv switching scaler with optional audio, component, s-video, composite, and pc inputs scaled vga or hdtv component output front panel, ir remote, & rs-232 serial control (20 pages)
Ex-hdu series hdmi and usb extension on single cat6 with audio out and integrated control system (12 pages)
Summary of Contents for Hall Research Technologies SC-VD-2
Page 1
Digital or Analog DVI output can be set to various PC or HDTV Resolutions! UMA1062 Rev. D Order toll-free in the U.S. 800-959-6439 CUSTOMER FREE technical support, Call 714-641-6607 or fax 714-641-6698 SUPPORT Mail order: Hall Research Technologies, 1163 Warner Ave., Tustin, CA 92780 INFORMATION Web site: www.hallresearch.com • E-mail: info@ hallresearch.com...
Page 3
VGA - to - DVI Video Scaler TRADEMARKS USED IN THIS MANUAL Hall Research, HRT, and (logo) are trademarks of Hall Research Technologies, Inc. IBM are a registered trademark of International Business Machines Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
The controls include input/output setup picture adjustment, H/V phase adjustment, System information and many other advanced options. The SC-VD-2 allows you to specify a resolution and refresh rate for its output. Then it will output a steady (uninterrupted) DVI signal to your display device at your specified rate regardless of the input.
2. Installation 2.1 Input connection The SC-VD-2 can accept both PC and HDTV inputs. When accepting a PC input use the 15-pin D-sub cable to connect the output of a PC device to the input connector labeled PC/HDTV on the back of SC-VD-2.
To use the SC-VD-2's digital output select DVI-D in the Output Setup of the menu, and use a DVI cable to connect the DVI output of the SC-VD-2 to the DVI input of a display monitor, or HDTV device.
Model SC-VD-2 3. Configuration & Operation 3.1 Front and Rear Panels 3.2 Menus and Adjustments Pressing the Menu button will bring up the OSD menu controls on the screen as follows: Input set up Output set up Picture Adjust HV Adjust...
Page 9
VGA - to - DVI Video Scaler Phase: Used to adjust for lowest noise of the picture (edge tearing). YPbPr RGB: The SC-VD-2 automatically detects and shows the input format as YPbPr or RGB. However, you can manually select the YPbPr or RGB to match the format of your input.
Page 10
Vertical position of the OSD menu. When selected, it shows the input/output resolutions and their vertical refresh rates on the screen. When selected the SC-VD-2 will automatically adjust all the parameter to the factory preset value. Select to exit from the current menu page.
If you need to transport or ship your Video Processor: • Package it carefully. We recommend that you use the original container. • Before you ship the units back to Hall Research Technologies for repair or return, contact us to get a Return Authorization (RMA) number.
Model SC-VD-2 Input Resolutions PC Resolutions HDTV Resolutions 640 X 480@60/72/75/85Hz 1080i 1920 X1080@60Hz VGA 70 720 X 400@70Hz 720p 1280X 720@60Hz VESA 85 640 X 400@85Hz 576p 720X 576@50Hz SVGA 800 X 600@60/72/75/85Hz 576i 720X 576@50Hz 1024 X 768@60/70/75/85Hz...