Sams Wiring With Relays Not Energized; Dual Gate Settings - Chamberlain CSW24U Installation Manual

SAMS WIRING WITH RELAYS NOT ENERGIZED

Dipswitch settings for AUX
Relay 1: 1-OFF, 2-OFF, 3-ON

DUAL GATE SETTINGS

NOTE: We recommend that all accessories and board configurations are set on the primary operator.
MAIN CONTROL BOARD
FEATURE PRIMARY OPERATOR
Timer-to- Set the TTC dial to desired
Close setting
Bi-Part Delay Bi-Part Delay: ON (will
Switch open last & close first)
Tandem Mode: OFF
Synchronized Close: ON
EXPANSION BOARD
FEATURE PRIMARY OPERATOR
QUICK CLOSE
Switch
ANTI-TAIL Switch
LOW BATT Switch Battery Fail OPEN:
Battery Fail CLOSE:
AC FAIL OPEN/BATT
Switch
Main Board
DIAGNOSTICS
Expansion Board
SECONDARY OPERATOR
OFF
Bi-Part Delay: OFF (will
open first & close last)
Tandem Mode: OFF
Synchronized Close: ON
SECONDARY
OPERATOR
ON OFF
ON OFF
Battery Fail OPEN:
OPEN OPEN
Battery Fail CLOSE:
CLOSE CLOSE
OPEN OPEN
APPENDIX
Exit Input
Shadow
POWER
Input
EYE
1
ONLY
EYE/
2
EDGE
EYE/
3
EDGE
COM
SBC
OPN
CLS
STP
COM
AUX Relay 1
ACCESSORY
Remote Controls Program remote controls
LiftMaster
Internet Gateway
Garage and Gate
Monitor
50
Barrier Arm Operator
C
Auxiliary
Command
NO
Access Device
PRIMARY OPERATOR
Program remote
1 to 50 to the primary
controls 51 to 100 to
operator.
the secondary operator
Program to primary
operator.
Program to primary
operator.
SECONDARY
OPERATOR