Chamberlain CSW24VDC Manual

Model CSW24VDC
Gate Operator and
Accessory Site Plan
®
1 MyQ Enabled Indoor Controls
2 Remote Controls
3 Photoelectric Sensors
4 Loop Detectors
5 Lock
6 Mounting Plate
7 Solar
8 Batteries
9 Heater
10 Swivel Arm
11 dwellingLIVE
10
7
3
8
9
6
LiftMaster gate operators comply with UL 325 standards. Important: To be compliant with UL 325 and industry safety guidelines, qualifi ed monitored external
entrapment protection devices such as photoelectric sensors or edge sensors are required to be installed with this operator.
ORDER SUMMARY
Customer:
Project:
Architect/Engineer:
Contractor:
Gate Length (ft.): Gate Weight (lbs.):
Power Source (120 or 240 VAC):
LiftMaster.com
2
1
11
5
4
Date:
Solar (Y/N):
828LM*
1
Internet Gateway
Imagine your Customers being
at the offi ce and receiving an
alert if they left their garage
or gate open. Or being able to
turn on their lights before they
get home. The 828LM Internet
Gateway, which connects to your
Customer's router and enables
smartphone control, does this by
letting them monitor, open and
close their garage door or gate
from anywhere and control home
lighting.
892LT & 894LT
2
2-Button and 4-Button
Security+ 2.0™ Learning
Remote Controls
These remote controls are ideal
for gated communities. One
button can control a gate operator
and the other(s) can control
a garage door. It can also be
programmed to different codes
and frequencies.
811LM & 813LM
Universal DIP Single-Button
and 3-Button Remote Control
These remote controls are ideal
for applications such as gated
communities or commercial
applications requiring a large
number of remotes for a common
entrance.
CPS-RPEN4GM
3
Photoelectric Sensor
(Monitored)
The photoelectric sensors are
designed to detect an obstacle in
the path of the electronic beam
and stop the operator. Includes
mounting brackets.
CPS-UN4
Photoelectric Sensor
(Monitored)
Low power through beam
photoelectric sensors, 45 foot
sensing distance, NEMA 4 rated.
Works in conjunction with Power
Management System to save
power.
4 LOOPDETLM
Plug-In Loop Detector
Plug-in Loop Detector,
(LOOPDETLM) innovative design
includes 8 sensitivity settings &
boost, ensures vehicles are easily
identifi ed.
* LiftMaster ® Internet Gateway Accessory functionality is
®
dependent on communication with a MyQ Enabled gate
operator. MyQ ® Technology communication can be limited
by distance and type of exterior building materials. A
general range estimate is 300 ft.
MG1300
5
Magnetic Gate Lock
LiftMaster Elite Series ® Maglock
(MG1300) Securely holds the
gate in the closed position
keeping unwanted visitors out.
(1300 lb holding force)
6 MPEL
Mounting Plate for Post
Mounting
For post mounting model
CSW24VDC commercial slide
operator. Posts not included.
SOLPNL20W12V
7
20 Watt 12V Solar Panel
Ideal for remote and sunny areas
without access to an AC outlet.
Two required.
SOLPNL10W12V
10 Watt 12V Solar Panel
Two required.
29-NP712
8
7Ah 12V Battery
Standard 7 AMP-Hour Battery, 12
Vdc, to replace original batteries
provided with operator. Reuse
existing harnesses.
A12330SGLPK
33Ah 12V Battery
Upgrade 33 AMP-Hour
Battery, 12 Vdc. Ideal for solar
applications and extended
battery backup. Two required.
HTR
9
Heater Kit
Heater kit for pad mount
operators. Protects system to
-40ºF. Installs on operator frame.
K75-50292
10
Swivel Arm
Swivel arm for uphill swing gate
applications.
dwellingLIVE
11
Advanced Visitor
Management and Access
Control Solution
• Credentialed Access
• Visitor Management
• Telephone Entry Systems
• License Plate Recognition
• Community Websites
• Mobile Patrol
• Front Desk Concierge