Adjusting The Onboard Lcd's Orientation; Obtain Mph2 System Information; Figure 18 Flip Lcd; Figure 19 Mph2 Rack Pdu Information Screen - Emerson Network Poewr MPH2 User Manual

3.1.3

Adjusting the Onboard LCD's Orientation

The onboard LCD may be flipped for viewing ease. To flip the screen:
1. Press any key to activate the LCD.
2. Press either the Right or Left arrow key to highlight the information icon (
3. Press the Select key.
4. Use the Right or Left arrow key to highlight the orientation icon
5. Press Select to the flip the screen's orientation.
NOTE
The same steps apply to the RPC BDM.

Figure 18 Flip LCD

3.1.4

Obtain MPH2 System Information

1. Use the Left or Right arrow key to move the cursor to the information icon (the letter i) in the
lower right corner.
2. Press the Select key.
The onboard LCD shows information about the MPH2: model number, serial number, firmware
version, power rating and number of outlets. See Figure 19. After 5 minutes of no activity (no key
pressed), the onboard LCD returns to the main screen.

Figure 19 MPH2 rack PDU information screen

® ™
Emerson MPH2
Model: MPHM3141
S/N: 4FEB030033
FW Ver: 0.4.1.2
Ratings: 1P3W 120V 16A
Receptacles: 16
Model: MPHM3141
S/N: 4FEB030033
FW Ver: 0.4.1.2
Ratings: 1P3W 120V 16A
Receptacles: 16
MPHM3
MPHM3
22
Operation
i
).
.