General Characteristics; Model Types; Figure 1 Vertical Mph2 Rack Pdu Configuration - Emerson Network Poewr MPH2 User Manual

Figure 1 Vertical MPH2 rack PDU Configuration
Monitoring Station
™
RPC Basic
Display Module
Serial Appliance
1.1

General Characteristics

• Input ampacities include 16A or 32A for European Union versions and 16A to 48A for North
American versions.
• Single-phase and three-phase.
• Input voltages include 100-120VAC, 120/208VAC, 200-240/415VAC.
• Outlets types include NEMA 5-20, IEC 320 C13 and IEC 320 C19
• Input connection supports a highly flexible fixed power cord or hard-wired connection to user
accessible terminal block.
1.2

Model Types

There are four types of MPH2 rack PDU.
• Type R—Outlet Metered, Outlet Switched: Supports metering of the overall input, individual
branches and individual outlets; also supports individual On/Off control of each outlet.
• Type M—Outlet Metered: Supports metering of the overall input, individual branches and
individual outlets.
• Type C—Rack PDU Metered, Outlet Switched: Supports metering of the overall input and of
individual branches and supports individual On/Off control of each outlet.
• Type B—Rack PDU Metered: Provides basic power distribution and supports metering of the
overall input and of the individual branches.
Vertical
MPH2
rack PDU
Network
Connection
(10MB/100M
B/1GB)
Sensors
Integrated and
Modular
5
Introduction
Connected Equipment
™
Rack PDU Array
®
Emerson MPH2
™