Table of Contents
Advertisement
Installation Set Up
Follow next procedure to check the configuration :
- switch on the projector.
- the projector starts up on the last selected source.
- press the ADJUST key.
- highlight 'SERVICE' with the control disc and press ENTER.
- select with the control disc 'PROJECTOR SET UP' and press ENTER.
- Select with the control disc 'IDENTIFICATION' and press ENTER.
The projector displays the Identification screen
This screen gives information about the projector configuration in the subject 'config.'.
MAIN MENU
Image Control
Function Keys
Service Menus
Select with
or
then <ENTER>
<EXIT> to return.
4-4 ____________________________________________________________________________ R5975819.05 BARCO CINE 6 21112002
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
PROJECTOR SET-UP
SERVICE
MEMORY MANAGEMENT
Source 1
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
or
then <ENTER>
<EXIT> to return.
Select with
<EXIT> to return.
The 'SERVICE MODE' will be displayed
The 'PROJECTOR SET UP' will be displayed.
SERVICE MODE
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
or
CHANGE LANGUAGE
then <ENTER>
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
COMMON ADDRESS : 0
BARCO LOGO
Select with
then <ENTER>
<EXIT> to return.
or
CINE 6
Proj. address : 001
Soft. Version
: 6.00
Config.
: Ceiling
Front
Baudrate PC
: 9600
Text
: ON
Serial No.
: 103589552
Advertisement
Table of Contents
