Table of Contents
Advertisement
Installation Guidelines
Mounting the Ceiling Mount
Washer M8
Screw M8
Screw M5
U plate
Nut M5
Screw M4
Right L plate
Left L plate
Make the position on the ceiling.
Insert 2 screws with wesher M8 and tighten the screw lightly on both side of U plate.
Fix
the U plate into the ceiling.
Fix the right and left L plate on the bottom of the projector, using two M4 screws each.
Shown in Fig.
Lift the projector and hook on the 2 screws M8 of the U plate mounted on the ceiling.
Fix four M5 screws and nuts to L plate and U plate.
Tighten the screws lightly.
Align / adjust the picture on the screen and then tighten all (M5 & M8) screws.
R5975819.05 BARCO CINE 6 21112002 ____________________________________________________________________________ 3-3
Advertisement
Table of Contents
